Package Includes:

• (1) Memphis PRX12FT 12” 400w RMS Car Subwoofer w/ 1, 2 or 4 Ohm Selectable Impedance
• (1) Rockville RD600.1 600w RMS @ 1 Ohm (2400w Peak) Mono Amplifier Car Audio Amp
• (1) Rockville RWK41 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA's
• (1) Rockville RS12 Single 12” 1.0 cu.ft. 3/4” MDF Sealed Subwoofer Enclosure Box
• (1) Complete Single Sub Box Enclosure Installation Kit: Speaker Wire, Screws, Spades

---

Description:

The PRX12FT 12″ Power Reference subwoofer is built to bring massive bass to your system with 400W RMS / 800W peak power. Featuring the innovative FLEX triple voice coil technology, this subwoofer gives you the ability to select between 1Ω, 2Ω, and 4Ω impedances simply by moving the jumper plug. This flexibility allows you to easily adapt your setup or add another woofer in the future. Designed for durability and performance, the PRX12FT is perfect for serious bass enthusiasts who demand versatility and power. Whether you’re upgrading your factory system or building a custom setup, this subwoofer delivers the deep, thunderous bass that Power Reference is known for.

Features:

• 12”FLEX Triple Selectable Impedance design
• DVVC Direct Voice Coil Cooling technology
• Black on black polypropylene cone
• Stitched butyl rubber surround
• Reinforced spider
• Improved suspension and coil design
• Woven tinsel leads
• High temperature TIL voice coil former

Specifications:

• PRX12FT: Tri Flex Selectable VC 1Ω 2Ω or 4Ω
• SIZE (IN): 12
• RMS/PEAK POWER: 400/800
• SENSITIVITY(Db): 1Ω 85.6 / 2Ω 85.5 / 4Ω 86
• MAGNET SIZE (Oz): 63
• MOUNTING DEPTH: 5.5
• CUT OUT DIAMETER: 11
• VOICE COIL DIAM: 2

Enclosure Recommendations:

	UNITS	TIGHT BASS	BALANCED BASS	DEEP BASS
Single sub sealed	cf. (GROSS)	1	1.25	1.5
Dual subs Sealed	cf. (GROSS)	2	2.5	3
Single sub sealed	cf. (NET)	1.8	2.25	2.65
Port dimensions		12.5"x1.75"x21"L	14"x1.875"x21"L	14"x2"x23"L
Tuning frequency	Hz	37	35	33
Dual sub sealed	cf. (NET)	2.4	2.9	3.6
Port dimensions		13"x3"x26"L	13.5"x3"x26"L	14.5"x3.25"x26"L
Tuning frequency	Hz	36	34	32

---

What's in the Box:

• Amplifier
• Metal Bass Remote with Clip Indicator
• Owner's Manual
• Mounting Screws
• Warranty

Description:

What is special about the RD Series:

More watts per dollar!
We are delivering more true RMS watts per dollar spent then our competitors. Especially considering that this amp was properly engineered in the USA

Compact!
The RD series by Rockville is a compact class “D” amp that will not take up a lot of your valuable trunk space.

Engineered in the USA
This amp delivers clean power to your subs. We benchmarked this against some of the top selling amps on the market and here are some differences making our amp better:

Our amp has some of the best efficiency numbers on the market which means our amp will not strain your battery as much as some less efficient ones

Our bass boost is properly engineered to boost the 45Hz frequency. Many amps we benchmarked this against have a bass boost that boosts 80Hz which makes it counter-productive. We pay a lot of attention to detail during our engineering phase in order to deliver a top-notch product at a great price.

Metal Bass Remote with Clipping Indicator
We include a high quality metal bass remote with a clipping indicator that allows you to easily increase your bass to its max level before distortion in real time. (This changes from song to song depending on the crest factor of your song). Some of the competing amps do not even have a clipping indicator on the actual amp which can cause you to blow your subs.

Tiffany RCA cables
We use tiffany style RCA terminals which are known to be the most secure and reliable on the market. 

This Amp Can Handle the Heat!
Our amp will not easily go into thermal protection. It dissipates heat efficiently. We tested it on an audio precision at 4 ohms with full power at 100 Hz for 45 minutes and the amp stayed cool and did not go into protect. Most amps on the market would go into protect in around 30 minutes if it’s a good quality amp.

This is a true class “D” design. Be careful with half-bridge designs. They are cheap to produce, but the sound quality, longevity, and safety of them are questionable.

Features:

• Rockville RD600.1 600 Watt Dyno-Certified RMS (2400w Peak) Mono 1 Ohm Car Amplifier
• Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc)
• 1 Ohm: 600 Watts x 1 Channel <1% THD+N (75% efficient)
• 2 Ohm: 400 Watts x 1 Channel <1% THD+N (85% efficient)
• 4 Ohm: 250 Watts x 1 Channel <1% THD+N (90% efficient)
• Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc) 
• 1 Ohm: 2400 Watts x 1 Channel
• 2 Ohm: 1600 Watts x 1 Channel
• 4 Ohm: 1000 Watts x 1 Channel
• Power/Protect/Clip LED Indicators on the front panel
• High-Speed MOSFET Power Supply
• High Performance Class D Technology
• Bass Boost @45Hz: 0dB-12dB
• Low Pass Filter: 50Hz - 200Hz
• Subsonic Filter: 10Hz - 50Hz
• Full IC-Controlled Protection Circuitry
• Remote Subwoofer Control
• Mute and Delay Soft Start System
• RCA Line Output (Tiffany style terminals)
• 8 Volt Preamp Circuitry
• Status Mode LED Indicator
• Minimum THD at Rated Power: <0.5%
• A Weighted Signal to Noise (per CEA 2006 Standard): -91.9dBA
• Frequency Response: 10Hz - 200Hz
• Damping Factor: >150 @ 100Hz
• Remote Level Attenuation: 0 to -26dB
• Useable Input Signal Voltage Range into 4 ohm load: 264mV – 8.0V
• Actual Maximum THD+N at 4 Ohm rated power: 0.5%
• Battery voltage limits for amplifier operation: 8v to 16.1v
• 2 x 30 Amp Maxi Fuse (Built in)
• 4 Gauge Power and Ground Terminals
• 8 Gauge speaker wire terminals
• Dimensions: (W x H x L) 9.6” x 4.9” x 1.8"

---

Video of RWK41:

Unboxing Video for RWK41:

Description:

The Rockville RWK41 4 AWG (American Wire Gauge) amp kit has the following differences over other amp kits on the market at this price point.

1. Our RCA cables are 100 % copper. These are top of the line RCA cables.

2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.

3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 4 gauge, but cheat you on the thickness. We are honest about the thickness.

4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.

The RCA signal transfer cables included in this kit feature blue and silver twisted pair technology in a clear outer jacket insulation skin. Not only do the blue and silver wires look cool but they also provide superior signal transfer with maximum noise suppression. They are 100% copper to provide absolute lossless perfect signal transfer to your receiver. This technology reduces interference, so your audio signal flows clean and pure at all power levels.

This kit also includes a massive 60 Amp AGU Gold Plated Fuse, so you can be sure it will handle the all the DC power that your amp will need without even the slightest loss of current. The included 7 split loom tube provides protection for your power cable from the typically harsh environment found under the hood of your car.

Audiosavings product experts have tested this amp kit against many leading amp kits on the market and were were impressed not only by the great looks but by the quality of these Rockville installation kits as well. These kits had a lower resistance rating than the other brands we compared and tested them against. What this means is that Rockville manufactures their kits with more copper than other kits at this price point, ultimately providing your amplifiers with better and cleaner DC power, so they work cooler and more efficiently. You will hear the difference a Rockville installation kit will make!

Features:

• 1 – 17’ High Grade Twisted Pair of 100% Copper RCA Cable
  
• 17’ – 4 Gauge Translucent Blue SuperFlex Power Cables
  
• 17’ – 18 Gauge Blue Remote Cable
  
• 17' 16 Gauge Translucent Blue SuperFlex
  
• 3' 4 Gauge Translucent Black SuperFlex Ground Wire
  
• Gold Plated AGU Heat Resistant Fuse Holder
  
• 60 Amp AGU Gold Plated Fuse
  
• 7’ Split Tube Loom
  
• Fuse value 100 Amp AGU Gold Plated Fuse
  
• Soft abrasion proof insulating jacket allows for 100" improved flexibility
  
• PVC outer jacket can withstand an extreme temperature range of -40 to 220 degrees F
  
• Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets

---

Description:

Introducing Rockville Sub Enclosures!

The RS12 single sealed speaker box is made in the USA with Grade "A" ¾" MDF wood. This enclosure is made with precision cutting machinery by industry experts that have been making these enclosures in the USA for over 20 years. All Rockville enclosures come with a customized enhanced glue that is unmatched by any other manufacturer. That means that the carpet will stay in place and not rip or tear. The ¾" USA MDF is much stronger then any type of import wood. This will keep your box performing at an optimal level by not flexing and distorting your woofers. Your woofers will thank you! EVERY Rockville enclosure is not only glued at all joints but stapled as well. If that wasn't enough we add a layer of silicon to every seam! This makes your Rockville enclosure rock even more!

MADE IN THE USA WITH PRIDE!

Features:

• Rockville RS12 Single 12" Sealed Subwoofer Enclosure
• Proudly Made In The USA, Using Only The Finest Quality Materials - For The Best Level of Performance From Your Subs!
• 3/4" USA Heavy Duty MDF Construction
• Machine precision cut mounting holes
• Top of the line Glue for extra durable adhesion
• High quality GOLD spring loaded terminals
• Designed, tested, and engineered to work with most of today's popular woofers. These enclosures are built with the quality additives needed to maximize the performance of any sound system.

Enclosure Measurements:

• Type of Enclosure: Sealed
• Enclosure Sub Size: Single 12"
• Dimensions in Inches: 18" L x 13.2" W x 13.2 H"
• Top and Bottom Depth: 13.2"
• Mounting Depth: up to 12.25" (enough depth for any sub on the market)
• Gross Volume Per Sub (Measurement for the outer dimensions of the box): 1.0 Cubic Feet
• Net Volume Per Sub (Measurement for the outer dimensions of the box less the thickness of the wood): 0.75 Cubic Feet

Fits Subwoofers Such As:

Brand	Product
MTX Audio	3512-02
	3512-04
	5512-22
	5512-44
	7512-22
	7512-44
	TN12-02
	TN12-04
Kicker	43CVR122
	43CVR124
	43CWR122
	43CWR124
	44CVX122
	44CVX124
Rockford Fosgate	P1S2-12
	P1S4-12
	P2D2-12
	P2D4-12
	P3D2-12
	P3D4-12
	R1S4-12

---

About Rockville Quality Control Procedures:

The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville sub enclosures are backed with a full 30 Day warranty, though it is unlikely that you will need to use it.

---

Complete Single Subwoofer Enclosure Installation Kit!

Includes:

• 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
• 12 Feet of 14 AWG Blue Speaker Wire
• 2 Spade Terminals

This accessory package includes everything you need to install one subwoofer into an enclosure, and wire to connect the enclosure to your amplifier. This package is a top of the line accessory package which we put together and tested.

The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure. The speaker wire is 14 gauge. This is way better than using 16 gauge. You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire. These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio signal cleanly.