Package Includes:

• (1) Pair Rockville RM-PREMIUM-65 BLACK 6.5" 600w Marine Boat Speakers - Crisp Sound!
• (1) Rockville RockZR v2 2014-2023 Polaris RZR Front Kick Panel 6.5" Speaker Pods
• (1) Rockville ATV220 2 Channel UTV/Motorcycle Bluetooth Amplifier IP65 Micro Amp

---

All About Your RM-PREMIUM-65 SPEAKERS:

How To Set Up Your RM-PREMIUM-65 Speakers:

How To Install Your RM-PREMIUM-65 Into Kick Panel Speaker Pods:

Includes:

• Pair of 6.5" Marine Speakers
• 9.84 feet of Speaker Wire
• Stainless Steel Mounting Screws

Description:

The Rockville RM-PREMIUM 65 marine speakers are our best sounding boat speakers. These have 11 Oz Y35 magnets for extreme power handling. The surface area of the cone on our speaker is significantly larger compared to 6.5" speakers from other brands. Our speaker outputs better low frequencies due to this. For high frequencies we have a 1” PEI dome tweeter with neo magnets. The highs are incredibly crisp and clear. We did many listening tests and our speaker out-performed speakers that are about 4 times the price.

One other important note is that the sensitivity rating of these is amazing so even if you are powering these with a regular receiver they will go super loud and sound great! If you are using an external amplifier then you are also in luck because the power handling is 75w RMS per speaker! This is perfect for amplifiers that can produce anywhere from 15w to 100w RMS per speaker at a 4 ohm load.

This is perfect for use in boats, ATV's, UTV's, and more.

With the RM-PREMIUM 65 you are paying for quality and performance, not for a fancy brand label. This is better and cheaper. You get way more than what you pay for guaranteed.

Features:

• Pair Rockville RM-PREMIUM-65 BLACK 6.5" 600w Marine Boat Speakers - Crisp Sound
• Best sounding Rockville marine speakers!
• True Coax Design With the Tweeter Completely Separated From the Cone
• Larger Cone Surface Area Gives Better Mids and Lows
• Less Mass Attached to the Cone Allows for Higher SPL and Sensitivity
• True coaxial design allows for superior sound quality, better stereo separation, and clearer mids and highs
• Peak power handling: 600 Watt per pair / 300 Watts per speaker
• RMS power handling: 150 Watt per pair / 75 Watts per speaker
• ABS Water/Weather Resistant Grills
• Fully Marinized Against Salt & Fresh Water Conditions
• Molded ABS basket for amazing sound and protection from the elements while out on the water
• Water and weather resistant Poly Injection Cone
• 11 Oz Y35 top of the line magnet supports high power handling
• Thick Rubber Surround
• High quality ferrite magnet
• 1” PEI Neodymium Dome Tweeter has Clear highs
• Oversized 1” Kapton Voice Coil
• Pre-installed Stainless-Steel mounting screws included
• Perfect for Marine, Car, ATV and UTV applications
• Impedance: 4-Ohm
• Frequency Response: 35Hz - 20KHz
• Sensitivity: 93dB @ 1w/1m
• Total Diameter: 7.17”
• Cutout Diameter: 5.787”
• Total Height: 3.82”
• Mounting Depth: 2.56”

---

All About Your ATV220:

How To Set Up Your ATV220:

How To Set Up Your ATV220 to a Head Unit:

Wires, Inputs, Outputs explained on your ATV220:

Description:

The Rockville ATV220 is a 2 channel amplifier for your ATV. It will deliver 200 x 2 @ 2 ohms RMS. We dyno-test the amp to make sure you get the power we promise.

This amp is IP65 which means even if you submerged it in water for a few seconds it would still function fine. This means you do not need to worry about your amp breaking when you spray down your vehicle.

The built in Bluetooth is great because you do not even need a head unit or controller. You can just install this amp and wire it to your speakers and Bluetooth your phone to the amp.

This amp is super compact making it easy to install in tight spaces.

If you want the most waterproof and high performing ATV amplifier on the market then this is a great option for you.

Features:

• Rockville ATV220 2 Channel UTV/Motorcycle Bluetooth Amplifier IP65 Waterproof Micro Amp
• Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc.)
• 2 Ohms: 400 Watts (2 x 200 Watts)
• 4 Ohms: 250 Watts (2 x 125 Watts)
• 4 Ohms Bridged: 400 Watts (1 x 400 Watts)
• Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc.)
• Peak 2 Ohms: 1600 Watts (800 x 2 Watts)
  
• Built in Bluetooth Wireless with Auto Pairing (You can run this amp without any receiver)
• IP65 waterproof rating
• All inputs and wire wiring is sealed and covered
• Conformal coated circuit board
• Anti rust materials
• This is one of the only amps on the market that is IP65. That means even if you submerged it for a couple of seconds it would work fine
• Efficiency at Full Power 4 Ohm (1kHz) 84.8%
• Efficiency at Full Power 2 Ohm (1kHz) 77.8%
• Micro Size amplifier can easily fit in tight spaces
• Digital Class D Audio Topology
• Distortion(THD): =0.5%
• Full Range/Low Pass/High Pass Configurable
• High Input (Speaker level Input)
• Low Pass Crossover: 32Hz-320Hz
• High Pass Crossover: 32Hz-320Hz
• Waterproof sheath RCA Input
• Frequency Response: 20Hz-22KHz
• Signal to Noise Ratio:  (1 Watt into 4 Ohms) =80dB
• Input Sensitivity: 0.2V-6V
• Speaker level Input Sensitivity: 0.5V-15.5V
• Stereo Separation: =50dB
• Fuse Rating: 35A
• Dimensions (Inches): 8.66" L x 3.74" W x 1.73" H
• High-Speed MOSFET Power supply
• Status Mode LED Indicator
• Waterproof Grade: IP65

---

Description:

Experience the ultimate in sound performance and durability with the Rockville RockZR V2 Speaker Pods. Engineered for any adventure, these speaker pods are designed to deliver exceptional audio quality in any weather condition rain or shine. Whether you're on the road or off the beaten path, the RockZR V2 ensures you enjoy superior sound wherever your journey takes you. its molded design provides superior water resistance. It Features stainless mounting hardware and watertight wire connectors with a rubber gasket for superior protection.

Features:

• Perfect Fit: Designed specifically for 2014-2023 Polaris RZR and XP models (not compatible with 2024 models).
  
• Durable Construction: Made from HDPE (High-Density Polyethylene), ensuring strength and waterproof protection.
  
• Complete Hardware Kit: Includes stainless mounting hardware and watertight wire connectors with a rubber gasket.
  
• Easy Connectivity: Features (2) spade terminals inside the enclosure for speaker connection and 1.6 feet of external wire for amplifier or receiver hookup.
  
• Secure Installation: Utilizes existing bolts with 2 additional mounting screws for extra security.
  
• Enhanced Sound Quality: New, robust design eliminates unwanted enclosure resonance and vibrations.
  
• Superior Water Resistance: Molded design offers better water resistance compared to competing models that use glue to seal screw holes.

Specifications:

• Compatible Speaker Sizes: 6.5"
  
• Cutout Diameter: 5.77"
  
• Mounting Depth: 3"
  
• Dimensions: Length: 10.2", Width: 8", Height: 5.6"
  
• Weight: 1.85 lbs. each