Package Includes:

• (1) Rockville RockZR v2 2014-2023 Polaris RZR Front Kick Panel 6.5" Speaker Pods
• (1) Pair KICKER 45KM654 6.5" 390w Marine Boat Speakers KM65 w/Charcoal+White Grilles
• (1) Rockville ATV220 2 Channel UTV/Motorcycle Bluetooth Amplifier IP65 Micro Amp

---

Authorized Kicker Dealer!

What's In The Box:

• (2) 6.5" 4-Ohm Coaxial
• (8) Mounting Screws
• (8) Mounting Screw Clips
• (2) Wire Connection Cover
• (2) Zip Ties

Description:

They're loud. They're clear. They're nearly indestructible! The KM Coaxial Marine Speakers are built to pump out the tunes - and the fun - for years to come! Whether you mount your speakers in the hull or in KICKER® tower enclosures, you also get a pair of stout marine-grade grilles!

Our speakers are made to thrive in the water. UV treatments on injection-molded cones, Santoprene® surrounds, baskets and grilles all help maintain top-shelf performance. KM speakers will endure almost any weather conditions with splash-and-spray-resistant sealed motors, cones and Locking/Sealed Terminal Covers. Speaker hardware is forged from rustproof, 316L stainless-steel.

Features:

• Pair KICKER 45KM654 6.5" 390W Marine Speakers KM65 with Charcoal + White Grilles
• RMS Power Handling: 65 Watts
• Peak Power Handling: 195 Watts
• Sensitivity: 90 dB
• Four-Ohm Voice Coil
• 3/4-Inch Titanium Tweeter
• UV-Treated Polypropylene Woofer With Santoprene® Surround
• UV-Resistant Polymer Basket
• Locking/Sealed Terminal Cover
• Sealed Motor Structure
• 316L Stainless Mounting Hardware Included
• Charcoal and White Grilles Included
• Meets or Exceeds ASTM Standards for UV and Salt/Fog Exposure
• Frequency Response: 35 Hz - 21 kHz
• Impedance: 4 Ohms
• Mounting Hole Diameter: 5.125" inches
• Mounting Depth: 2.875" inches

---

All About Your ATV220:

How To Set Up Your ATV220:

How To Set Up Your ATV220 to a Head Unit:

Wires, Inputs, Outputs explained on your ATV220:

Description:

The Rockville ATV220 is a 2 channel amplifier for your ATV. It will deliver 200 x 2 @ 2 ohms RMS. We dyno-test the amp to make sure you get the power we promise.

This amp is IP65 which means even if you submerged it in water for a few seconds it would still function fine. This means you do not need to worry about your amp breaking when you spray down your vehicle.

The built in Bluetooth is great because you do not even need a head unit or controller. You can just install this amp and wire it to your speakers and Bluetooth your phone to the amp.

This amp is super compact making it easy to install in tight spaces.

If you want the most waterproof and high performing ATV amplifier on the market then this is a great option for you.

Features:

• Rockville ATV220 2 Channel UTV/Motorcycle Bluetooth Amplifier IP65 Waterproof Micro Amp
• Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc.)
• 2 Ohms: 400 Watts (2 x 200 Watts)
• 4 Ohms: 250 Watts (2 x 125 Watts)
• 4 Ohms Bridged: 400 Watts (1 x 400 Watts)
• Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc.)
• Peak 2 Ohms: 1600 Watts (800 x 2 Watts)
  
• Built in Bluetooth Wireless with Auto Pairing (You can run this amp without any receiver)
• IP65 waterproof rating
• All inputs and wire wiring is sealed and covered
• Conformal coated circuit board
• Anti rust materials
• This is one of the only amps on the market that is IP65. That means even if you submerged it for a couple of seconds it would work fine
• Efficiency at Full Power 4 Ohm (1kHz) 84.8%
• Efficiency at Full Power 2 Ohm (1kHz) 77.8%
• Micro Size amplifier can easily fit in tight spaces
• Digital Class D Audio Topology
• Distortion(THD): =0.5%
• Full Range/Low Pass/High Pass Configurable
• High Input (Speaker level Input)
• Low Pass Crossover: 32Hz-320Hz
• High Pass Crossover: 32Hz-320Hz
• Waterproof sheath RCA Input
• Frequency Response: 20Hz-22KHz
• Signal to Noise Ratio:  (1 Watt into 4 Ohms) =80dB
• Input Sensitivity: 0.2V-6V
• Speaker level Input Sensitivity: 0.5V-15.5V
• Stereo Separation: =50dB
• Fuse Rating: 35A
• Dimensions (Inches): 8.66" L x 3.74" W x 1.73" H
• High-Speed MOSFET Power supply
• Status Mode LED Indicator
• Waterproof Grade: IP65

---

Description:

Experience the ultimate in sound performance and durability with the Rockville RockZR V2 Speaker Pods. Engineered for any adventure, these speaker pods are designed to deliver exceptional audio quality in any weather condition rain or shine. Whether you're on the road or off the beaten path, the RockZR V2 ensures you enjoy superior sound wherever your journey takes you. its molded design provides superior water resistance. It Features stainless mounting hardware and watertight wire connectors with a rubber gasket for superior protection.

Features:

• Perfect Fit: Designed specifically for 2014-2023 Polaris RZR and XP models (not compatible with 2024 models).
  
• Durable Construction: Made from HDPE (High-Density Polyethylene), ensuring strength and waterproof protection.
  
• Complete Hardware Kit: Includes stainless mounting hardware and watertight wire connectors with a rubber gasket.
  
• Easy Connectivity: Features (2) spade terminals inside the enclosure for speaker connection and 1.6 feet of external wire for amplifier or receiver hookup.
  
• Secure Installation: Utilizes existing bolts with 2 additional mounting screws for extra security.
  
• Enhanced Sound Quality: New, robust design eliminates unwanted enclosure resonance and vibrations.
  
• Superior Water Resistance: Molded design offers better water resistance compared to competing models that use glue to seal screw holes.

Specifications:

• Compatible Speaker Sizes: 6.5"
  
• Cutout Diameter: 5.77"
  
• Mounting Depth: 3"
  
• Dimensions: Length: 10.2", Width: 8", Height: 5.6"
  
• Weight: 1.85 lbs. each