Package Includes:

• (1) Rockville RockZR v2 2014-2023 Polaris RZR Front Kick Panel 6.5" Speaker Pods
• (1) Pair Rockville RSM65B 6.5" 320 Watt Waterproof Shallow Slim Marine Boat Speakers
• (1) Rockville ATV220 2 Channel UTV/Motorcycle Bluetooth Amplifier IP65 Micro Amp

---

Video of RSM65:

Includes:

• Pair of 6.5" Marine Speakers
• Speaker Wire
• Mounting Screws
• Owner's Manual
• Warranty Card

Description:

Rockville is proud to introduce the all new RSM65B Super shallow mount series of marine speakers. These speakers are the slimmest marine speakers available on the market and are perfect for Marine, ATV, UTV, Golf Cart, snowmobile and motorcycle application. They feature 160 Watts of power per speaker or 320 Watts per pair. The RSM65B is CEA rated which means the consumer electronics association recognizes them to be accurately rated and meets there rigorous standards for wattage, SPL, and frequency response so buy with confidence! These speakers have a lot more bass and mids than any other speaker on the market at this price point. You can compare them to top branded marine speakers on the market today!

The RSM65B speakers are completely waterproof and protected from the elements. They are UV treated and have a special waterproof coating to prevent water damage. Also these speakers come with a 1 year warranty to give you the peace of mind you deserve when purchasing from Rockville!

Rockville engineers care about quality and sound more than anything else. The RSM65B was designed in a molded ABS plastic basket. We use rubber surrounds on these to eliminate unwanted distortion. In addition rubber is a very waterproof material. The low end bass and mids of these speakers really makes them stand out.

These speakers come with everything you need for installation including pre mounted grills, speaker wire and mounting hardware.

Features:

• Pair Rockville RSM65B 6.5" 320 Watt Waterproof Shallow Marine Speakers
• CEA Compliant Power Ratings
• Power Rating: 160 Watts Peak /40 Watts RMS Per Speaker
• 6.5" Dual injection Cone Speaker System
• Fully Marinized Against Salt & Fresh Water Conditions
• Completely Waterproof and rustproof
• Molded ABS plastic basket
• Rubber Surround
• 1" Voice Coil
• 5.4 oz Y30 magnet
• Pre-installed mounting screws included
• Perfect for both marine, outdoor, and car use
• Impedance: 4 Ohms
• Frequency Response: 60Hz - 18KHz
• Sensitivity: 90 dB
• Total Diameter: 7.32" inches
• Cutout Diameter: 5.31" inches
• Total Height: 1.57" inches
• Mounting Depth: 0.925" inches

---

The Rockville Difference:

Whenever you see the Rockville shield on a product you know that it has the stamp of approval. While other companies simply import products from China, Rockville manufactures the products in China to lower your cost but do so under American style supervision and quality standards to get you that USA quality that you want!

---

All About Your ATV220:

How To Set Up Your ATV220:

How To Set Up Your ATV220 to a Head Unit:

Wires, Inputs, Outputs explained on your ATV220:

Description:

The Rockville ATV220 is a 2 channel amplifier for your ATV. It will deliver 200 x 2 @ 2 ohms RMS. We dyno-test the amp to make sure you get the power we promise.

This amp is IP65 which means even if you submerged it in water for a few seconds it would still function fine. This means you do not need to worry about your amp breaking when you spray down your vehicle.

The built in Bluetooth is great because you do not even need a head unit or controller. You can just install this amp and wire it to your speakers and Bluetooth your phone to the amp.

This amp is super compact making it easy to install in tight spaces.

If you want the most waterproof and high performing ATV amplifier on the market then this is a great option for you.

Features:

• Rockville ATV220 2 Channel UTV/Motorcycle Bluetooth Amplifier IP65 Waterproof Micro Amp
• Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc.)
• 2 Ohms: 400 Watts (2 x 200 Watts)
• 4 Ohms: 250 Watts (2 x 125 Watts)
• 4 Ohms Bridged: 400 Watts (1 x 400 Watts)
• Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc.)
• Peak 2 Ohms: 1600 Watts (800 x 2 Watts)
  
• Built in Bluetooth Wireless with Auto Pairing (You can run this amp without any receiver)
• IP65 waterproof rating
• All inputs and wire wiring is sealed and covered
• Conformal coated circuit board
• Anti rust materials
• This is one of the only amps on the market that is IP65. That means even if you submerged it for a couple of seconds it would work fine
• Efficiency at Full Power 4 Ohm (1kHz) 84.8%
• Efficiency at Full Power 2 Ohm (1kHz) 77.8%
• Micro Size amplifier can easily fit in tight spaces
• Digital Class D Audio Topology
• Distortion(THD): =0.5%
• Full Range/Low Pass/High Pass Configurable
• High Input (Speaker level Input)
• Low Pass Crossover: 32Hz-320Hz
• High Pass Crossover: 32Hz-320Hz
• Waterproof sheath RCA Input
• Frequency Response: 20Hz-22KHz
• Signal to Noise Ratio:  (1 Watt into 4 Ohms) =80dB
• Input Sensitivity: 0.2V-6V
• Speaker level Input Sensitivity: 0.5V-15.5V
• Stereo Separation: =50dB
• Fuse Rating: 35A
• Dimensions (Inches): 8.66" L x 3.74" W x 1.73" H
• High-Speed MOSFET Power supply
• Status Mode LED Indicator
• Waterproof Grade: IP65

---

Description:

Experience the ultimate in sound performance and durability with the Rockville RockZR V2 Speaker Pods. Engineered for any adventure, these speaker pods are designed to deliver exceptional audio quality in any weather condition rain or shine. Whether you're on the road or off the beaten path, the RockZR V2 ensures you enjoy superior sound wherever your journey takes you. its molded design provides superior water resistance. It Features stainless mounting hardware and watertight wire connectors with a rubber gasket for superior protection.

Features:

• Perfect Fit: Designed specifically for 2014-2023 Polaris RZR and XP models (not compatible with 2024 models).
  
• Durable Construction: Made from HDPE (High-Density Polyethylene), ensuring strength and waterproof protection.
  
• Complete Hardware Kit: Includes stainless mounting hardware and watertight wire connectors with a rubber gasket.
  
• Easy Connectivity: Features (2) spade terminals inside the enclosure for speaker connection and 1.6 feet of external wire for amplifier or receiver hookup.
  
• Secure Installation: Utilizes existing bolts with 2 additional mounting screws for extra security.
  
• Enhanced Sound Quality: New, robust design eliminates unwanted enclosure resonance and vibrations.
  
• Superior Water Resistance: Molded design offers better water resistance compared to competing models that use glue to seal screw holes.

Specifications:

• Compatible Speaker Sizes: 6.5"
  
• Cutout Diameter: 5.77"
  
• Mounting Depth: 3"
  
• Dimensions: Length: 10.2", Width: 8", Height: 5.6"
  
• Weight: 1.85 lbs. each