Package Includes:

• (1) Rockville RockZR v2 2014-2023 Polaris RZR Front Kick Panel 6.5" Speaker Pods
• (1) Pair Rockville RSM65B 6.5" 320 Watt Waterproof Shallow Slim Marine Boat Speakers
• (1) Rockville UT65B UTV/ATV 6.5" Rollbar Wakeboard Marine Speakers/Swivel Mount/IPX6
• (1) Rockville PS40 4 Channel ATV/UTV/Motorcycle Bluetooth Amplifier IP65 Micro Amp 

---

Video of RSM65:

Includes:

• Pair of 6.5" Marine Speakers
• Speaker Wire
• Mounting Screws
• Owner's Manual
• Warranty Card

Description:

Rockville is proud to introduce the all new RSM65B Super shallow mount series of marine speakers. These speakers are the slimmest marine speakers available on the market and are perfect for Marine, ATV, UTV, Golf Cart, snowmobile and motorcycle application. They feature 160 Watts of power per speaker or 320 Watts per pair. The RSM65B is CEA rated which means the consumer electronics association recognizes them to be accurately rated and meets there rigorous standards for wattage, SPL, and frequency response so buy with confidence! These speakers have a lot more bass and mids than any other speaker on the market at this price point. You can compare them to top branded marine speakers on the market today!

The RSM65B speakers are completely waterproof and protected from the elements. They are UV treated and have a special waterproof coating to prevent water damage. Also these speakers come with a 1 year warranty to give you the peace of mind you deserve when purchasing from Rockville!

Rockville engineers care about quality and sound more than anything else. The RSM65B was designed in a molded ABS plastic basket. We use rubber surrounds on these to eliminate unwanted distortion. In addition rubber is a very waterproof material. The low end bass and mids of these speakers really makes them stand out.

These speakers come with everything you need for installation including pre mounted grills, speaker wire and mounting hardware.

Features:

• Pair Rockville RSM65B 6.5" 320 Watt Waterproof Shallow Marine Speakers
• CEA Compliant Power Ratings
• Power Rating: 160 Watts Peak /40 Watts RMS Per Speaker
• 6.5" Dual injection Cone Speaker System
• Fully Marinized Against Salt & Fresh Water Conditions
• Completely Waterproof and rustproof
• Molded ABS plastic basket
• Rubber Surround
• 1" Voice Coil
• 5.4 oz Y30 magnet
• Pre-installed mounting screws included
• Perfect for both marine, outdoor, and car use
• Impedance: 4 Ohms
• Frequency Response: 60Hz - 18KHz
• Sensitivity: 90 dB
• Total Diameter: 7.32" inches
• Cutout Diameter: 5.31" inches
• Total Height: 1.57" inches
• Mounting Depth: 0.925" inches

---

The Rockville Difference:

Whenever you see the Rockville shield on a product you know that it has the stamp of approval. While other companies simply import products from China, Rockville manufactures the products in China to lower your cost but do so under American style supervision and quality standards to get you that USA quality that you want!

---

How To Set Up Your UT65B:

UT65B PRODUCT VIDEO:

What's In The Box:

• 2 swivel mount roll bar / wakeboard speakers
• Swivel Mounting brackets and mounting hardware to fit 1.5'' or 1.75" or 1.875" or 2" bars
• Installation Hardware
• Owner's Manual
• Warranty Card

Features:

• Rockville UT65B Pair 6.5" Marine UTV/ATV Roll Bar / Wakeboard Tower Speakers
• Peak Power Handling: 400 Watts
• RMS Power Handling: 100 Watts
• True Coax Design With the Tweeter Completely Separated From the Cone
• Larger Cone Surface Area Gives Better Mids and Lows
• Less Mass Attached to the Cone Allows for Higher SPL and Sensitivity
• True coaxial design allows for superior sound quality, better stereo separation, and clearer mids and highs
• Heavy Duty ABS enclosure
• IPX6 Water Resistance Rated
• Marine-grade components are protected from the outdoor elements
• Adjustable Aluminum Mounting Bracket is Strong and Sturdy
• Bracket Swivels 360 Degrees (Fixed swivel)
• Bracket supports any rollbar from 1.5" to 2" inches thick
• 6.5" Woofers with 11 oz Magnets and Oversized 1.25" Kapton Voice Coils
• 1" PEI Dome Tweeters with Neo magnets
• Fits wakeboard towers and roll bars ranging from 1.5" to 2" inches
• Shallow enclosure design is perfect for UTV, ATV, and marine applications
• Built-In Two-Way Crossover Network
• Fully Marinized Against Salt & Fresh Water Conditions
• Completely Resistant to Water, Rust, and UV Rays
• Terminals Are Sealed internally with silicone making them resistant to water
• Polypropylene Mica Injected Cone with Butyl Rubber Surround
• Frequency Response: 60Hz - 20KHz
• SPL: 87dB @ 1w/1m
• Impedance: 4 Ohms
• Shockproof Design
• ABS Weather Resistant Grills and Hardware
• CE and RoHS Certified
• Color: Black
• Dimensions (H x W x D): 9.84" x 7.17" x 7.32"

---

All About Your PS40:

How To Set Up Your PS40:

Inputs, Outputs and Functions Explained on Your PS40:

Description:

The Rockville PS40 is a 4 channel amplifier that is perfect for any powersport application like UTV, ATV, motorcycle, etc. It will deliver 85 x 4 watts RMS @ 2 ohms. We dyno-test the amp to make sure you get the power we promise

This amp is IP65 which means even if you submerged it in water for a few seconds it will still function fine. This means you do not need to worry about your amp breaking when you spray down your vehicle. The amp also has waterproof silicone covers over the control panel and inputs to give additional protection.

The built-in Bluetooth is great because you do not even need a head unit or controller. You can just install this amp and wire it to your speakers and then Bluetooth your phone to the amp.

This amp is super compact making it easy to install into tight spaces.

If you want the most waterproof and high performing powersport amplifier on the market then the PS40 is a great option for you.

Features:

• Rockville PS40 4 Channel ATV/UTV Bluetooth Amplifier IP65 Waterproof Micro Amp
  
• Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top premium brands)
  
• 2 Ohms: 340 Watts (4 x 85 Watts)
  
• 4 Ohms: 200 Watts (4 x 50 Watts)
• 4 Ohm Bridged: 340w (2 x 170 Watts)
• Peak @ 2 Ohms: 1,350 Watts (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc)
• Built-in Wireless Bluetooth with Auto Pairing (You can run this amp without any receiver)
• IP65 waterproof rating
  
• Waterproof silicone covers on all inputs and control panel 
  
• Conformal coated circuit board
  
• Anti-rust materials
  
• Micro Size amplifier can easily fit in tight spaces making it perfect for Motorcycles, UTV, ATV, etc
  
• Digital Class D Audio Topology
  
• Distortion (THD): ≤0.5%
  
• Independent Crossover Controls for CH1-2 and CH3-4
  
• Full Range/Low Pass/High Pass Crossover 
  
• RCA Low level inputs and High Level Inputs (with Auto ON)
  
• Selectable LPF/FULL/HPF with Variable Crossover Frequency: 50Hz-250Hz
  
• Selectable 0/3/6dB Bass Equalizer
  
• Waterproof RCA Input
  
• Frequency Response: 20Hz-20KHz
  
• Signal to Noise Ratio: (1 Watt into 4 Ohms) ≥75dB
  
• Input Sensitivity: 0.5V-15V
  
• Stereo Separation: ≥45dB
  
• Fuse Rating: 30A
  
• High-Speed MOSFET Power supply
  
• Status Mode LED Indicator
  
• Dimensions (Inches): 7.56" L x 3.66" W x 2.07" H

---

Description:

Experience the ultimate in sound performance and durability with the Rockville RockZR V2 Speaker Pods. Engineered for any adventure, these speaker pods are designed to deliver exceptional audio quality in any weather condition rain or shine. Whether you're on the road or off the beaten path, the RockZR V2 ensures you enjoy superior sound wherever your journey takes you. its molded design provides superior water resistance. It Features stainless mounting hardware and watertight wire connectors with a rubber gasket for superior protection.

Features:

• Perfect Fit: Designed specifically for 2014-2023 Polaris RZR and XP models (not compatible with 2024 models).
  
• Durable Construction: Made from HDPE (High-Density Polyethylene), ensuring strength and waterproof protection.
  
• Complete Hardware Kit: Includes stainless mounting hardware and watertight wire connectors with a rubber gasket.
  
• Easy Connectivity: Features (2) spade terminals inside the enclosure for speaker connection and 1.6 feet of external wire for amplifier or receiver hookup.
  
• Secure Installation: Utilizes existing bolts with 2 additional mounting screws for extra security.
  
• Enhanced Sound Quality: New, robust design eliminates unwanted enclosure resonance and vibrations.
  
• Superior Water Resistance: Molded design offers better water resistance compared to competing models that use glue to seal screw holes.

Specifications:

• Compatible Speaker Sizes: 6.5"
  
• Cutout Diameter: 5.77"
  
• Mounting Depth: 3"
  
• Dimensions: Length: 10.2", Width: 8", Height: 5.6"
  
• Weight: 1.85 lbs. each